Curious about the best AI coding assistant? An AI coding assistant is software that uses machine learning to help you get more done — it combines speed, accuracy, and an interface that just works. Hands-on testing shows real-world results vary, so a short free trial is the smartest way to decide. Whether you are a beginner or a pro, the right AI coding assistant slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.
CAMeL-View TestRig
CAMeL-View is a software application, which is used for the model based design of mechatronic systems (multi-body simulation, block diagrams, pneumatic systems, hydraulic systems, general simulation, linear analysis and Hardware-in-the-Loop). CAMeL-View enables object-oriented model creation of mechatronic systems through the use of graphic blocks. The basic elements of multi-body system dynamics, control technology, hydraulics and hardware connectivity support the modeling process. The user’s proprietary C-Code can also be integrated into the models, which allows CAMeL-View TestRig to be implemented in all phases of the model based design process ( modeling, physical testing and prototyping), and lends itself especially well to mechatronic system design. The model’s structure is described and displayed with the help of directional connectors. Physical connections (such as mechanical or hydraulic linkages) as well as input and output connections (signal flow) are also available. The input of equations is done via mathematical expressions, e.g. the input of constitutive differential equations in vector and matrix form. Based on the model’s structure, the descriptive equations are converted into non-linear state space representations and converted into executable C-Code. CAMeL-View supports the simulation process with a configurable “experiment environment” (for simulator and instrumentation components) which allows the user to apply simulation models to supported targets (MPC5200, TriCore, X86, etc.) without the need for additional software tools for Hardware-in-the-Loop applications. In addition, the generation of so-called S-Functions for use in Simulink and the generation of ANSI C-Code for use in stand-alone simulators is also supported. A particularly noteworthy feature in CAMeL-View TestRig is the way in which the descriptive equations for multi-body system models are created. All multi-body simulation formalisms used for code generation create their equations in the form of typical explicit differential equations (ODE). This is especially important in Hardware-in-the-Loop applications where the calculation of simulation results within a specific, defined time frame must be assured. Only then is it possible to implement complex multi-body simulation models for Hardware-in-the-Loop applications under stringent real-time conditions. These constraints cannot be met when using DAE-based methods. Additional Toolboxes are available for linear analysis (Eigenvalues, pole-zero analysis, frequency response, etc.) of VRML-based animation. Development of CAMeL-View began in 1991 in the Paderborn Mechatronic Laboratory of Professor Dr. Ing. J. Lückel. The software was based on predecessors that had been developed there since 1986. The name stands for Computer Aided Mechatronic Laboratory – Virtual Engineering Workbench and describes the basic intent of one of the specific demands placed on development engineers in the computer lab.
Active networking
Active networking is a communication pattern that allows packets flowing through a telecommunications network to dynamically modify the operation of the network. Active network architecture is composed of execution environments (similar to a unix shell that can execute active packets), a node operating system capable of supporting one or more execution environments. It also consists of active hardware, capable of routing or switching as well as executing code within active packets. This differs from the traditional network architecture which seeks robustness and stability by attempting to remove complexity and the ability to change its fundamental operation from underlying network components. Network processors are one means of implementing active networking concepts. Active networks have also been implemented as overlay networks. == What does it offer? == Active networking allows the possibility of highly tailored and rapid "real-time" changes to the underlying network operation. This enables such ideas as sending code along with packets of information allowing the data to change its form (code) to match the channel characteristics. The smallest program that can generate a sequence of data can be found in the definition of Kolmogorov complexity. The use of real-time genetic algorithms within the network to compose network services is also enabled by active networking. == How it relates to other networking paradigms == Active networking relates to other networking paradigms primarily based upon how computing and communication are partitioned in the architecture. === Active networking and software-defined networking === Active networking is an approach to network architecture with in-network programmability. The name derives from a comparison with network approaches advocating minimization of in-network processing, based on design advice such as the "end-to-end argument". Two major approaches were conceived: programmable network elements ("switches") and capsules, a programmability approach that places computation within packets traveling through the network. Treating packets as programs later became known as "active packets". Software-defined networking decouples the system that makes decisions about where traffic is sent (the control plane) from the underlying systems that forward traffic to the selected destination (the data plane). The concept of a programmable control plane originated at the University of Cambridge in the Systems Research Group, where (using virtual circuit identifiers available in Asynchronous Transfer Mode switches) multiple virtual control planes were made available on a single physical switch. Control Plane Technologies (CPT) was founded to commercialize this concept. == Fundamental challenges == Active network research addresses the nature of how best to incorporate extremely dynamic capability within networks. In order to do this, active network research must address the problem of optimally allocating computation versus communication within communication networks. A similar problem related to the compression of code as a measure of complexity is addressed via algorithmic information theory. One of the challenges of active networking has been the inability of information theory to mathematically model the active network paradigm and enable active network engineering. This is due to the active nature of the network in which communication packets contain code that dynamically change the operation of the network. Fundamental advances in information theory are required in order to understand such networks. == Nanoscale active networks == As the limit in reduction of transistor size is reached with current technology, active networking concepts are being explored as a more efficient means accomplishing computation and communication. More on this can be found in nanoscale networking.
Harmonic
In physics, acoustics, and telecommunications, a harmonic is a sinusoidal wave with a frequency that is a positive integer multiple of the fundamental frequency of a periodic signal. The fundamental frequency is also called the 1st harmonic; the other harmonics are known as higher harmonics. As all harmonics are periodic at the fundamental frequency, the sum of harmonics is also periodic at that frequency. The set of harmonics forms a harmonic series. The term is employed in various disciplines, including music, physics, acoustics, electronic power transmission, radio technology, and other fields. For example, if the fundamental frequency is 50 Hz, a common AC power supply frequency, the frequencies of the first three higher harmonics are 100 Hz (2nd harmonic), 150 Hz (3rd harmonic), 200 Hz (4th harmonic) and any addition of waves with these frequencies is periodic at 50 Hz. An n {\displaystyle \ n} th characteristic mode, for n > 1 , {\displaystyle \ n>1\ ,} will have nodes that are not vibrating. For example, the 3rd characteristic mode will have nodes at 1 3 L {\displaystyle \ {\tfrac {1}{3}}\ L\ } and 2 3 L , {\displaystyle \ {\tfrac {2}{3}}\ L\ ,} where L {\displaystyle \ L\ } is the length of the string. In fact, each n {\displaystyle \ n} th characteristic mode, for n {\displaystyle \ n\ } not a multiple of 3, will not have nodes at these points. These other characteristic modes will be vibrating at the positions 1 3 L {\displaystyle \ {\tfrac {1}{3}}\ L\ } and 2 3 L . {\displaystyle \ {\tfrac {2}{3}}\ L~.} If the player gently touches one of these positions, then these other characteristic modes will be suppressed. The tonal harmonics from these other characteristic modes will then also be suppressed. Consequently, the tonal harmonics from the n {\displaystyle \ n} th characteristic characteristic modes, where n {\displaystyle \ n\ } is a multiple of 3, will be made relatively more prominent. In music, harmonics are used on string instruments and wind instruments as a way of producing sound on the instrument, particularly to play higher notes and, with strings, obtain notes that have a unique sound quality or "tone colour". On strings, bowed harmonics have a "glassy", pure tone. On stringed instruments, harmonics are played by touching (but not fully pressing down the string) at an exact point on the string while sounding the string (plucking, bowing, etc.); this allows the harmonic to sound, a pitch which is always higher than the fundamental frequency of the string. == Terminology == Harmonics may be called "overtones", "partials", or "upper partials", and in some music contexts, the terms "harmonic", "overtone" and "partial" are used fairly interchangeably. But more precisely, the term "harmonic" includes all pitches in a harmonic series (including the fundamental frequency) while the term "overtone" only includes pitches above the fundamental. == Characteristics == A whizzing, whistling tonal character, distinguishes all the harmonics both natural and artificial from the firmly stopped intervals; therefore their application in connection with the latter must always be carefully considered. Most acoustic instruments emit complex tones containing many individual partials (component simple tones or sinusoidal waves), but the untrained human ear typically does not perceive those partials as separate phenomena. Rather, a musical note is perceived as one sound, the quality or timbre of that sound being a result of the relative strengths of the individual partials. Many acoustic oscillators, such as the human voice or a bowed violin string, produce complex tones that are more or less periodic, and thus are composed of partials that are nearly matched to the integer multiples of fundamental frequency and therefore resemble the ideal harmonics and are called "harmonic partials" or simply "harmonics" for convenience (although it's not strictly accurate to call a partial a harmonic, the first being actual and the second being theoretical). Oscillators that produce harmonic partials behave somewhat like one-dimensional resonators, and are often long and thin, such as a guitar string or a column of air open at both ends (as with the metallic modern orchestral transverse flute). Wind instruments whose air column is open at only one end, such as trumpets and clarinets, also produce partials resembling harmonics. However they only produce partials matching the odd harmonics—at least in theory. In practical use, no real acoustic instrument behaves as perfectly as the simplified physical models predict; for example, instruments made of non-linearly elastic wood, instead of metal, or strung with gut instead of brass or steel strings, tend to have not-quite-integer partials. Partials whose frequencies are not integer multiples of the fundamental are referred to as inharmonic partials. Some acoustic instruments emit a mix of harmonic and inharmonic partials but still produce an effect on the ear of having a definite fundamental pitch, such as pianos, strings plucked pizzicato, vibraphones, marimbas, and certain pure-sounding bells or chimes. Antique singing bowls are known for producing multiple harmonic partials or multiphonics. Other oscillators, such as cymbals, drum heads, and most percussion instruments, naturally produce an abundance of inharmonic partials and do not imply any particular pitch, and therefore cannot be used melodically or harmonically in the same way other instruments can. Building on of Sethares (2004), dynamic tonality introduces the notion of pseudo-harmonic partials, in which the frequency of each partial is aligned to match the pitch of a corresponding note in a pseudo-just tuning, thereby maximizing the consonance of that pseudo-harmonic timbre with notes of that pseudo-just tuning. == Partials, overtones, and harmonics == An overtone is any partial higher than the lowest partial in a compound tone. The relative strengths and frequency relationships of the component partials determine the timbre of an instrument. The similarity between the terms overtone and partial sometimes leads to their being loosely used interchangeably in a musical context, but they are counted differently, leading to some possible confusion. In the special case of instrumental timbres whose component partials closely match a harmonic series (such as with most strings and winds) rather than being inharmonic partials (such as with most pitched percussion instruments), it is also convenient to call the component partials "harmonics", but not strictly correct, because harmonics are numbered the same even when missing, while partials and overtones are only counted when present. This chart demonstrates how the three types of names (partial, overtone, and harmonic) are counted (assuming that the harmonics are present): In many musical instruments, it is possible to play the upper harmonics without the fundamental note being present. In a simple case (e.g., recorder) this has the effect of making the note go up in pitch by an octave, but in more complex cases many other pitch variations are obtained. In some cases it also changes the timbre of the note. This is part of the normal method of obtaining higher notes in wind instruments, where it is called overblowing. The extended technique of playing multiphonics also produces harmonics. On string instruments it is possible to produce very pure sounding notes, called harmonics or flageolets by string players, which have an eerie quality, as well as being high in pitch. Harmonics may be used to check at a unison the tuning of strings that are not tuned to the unison. For example, lightly fingering the node found halfway down the highest string of a cello produces the same pitch as lightly fingering the node 1 / 3 of the way down the second highest string. For the human voice see Overtone singing, which uses harmonics. While it is true that electronically produced periodic tones (e.g. square waves or other non-sinusoidal waves) have "harmonics" that are whole number multiples of the fundamental frequency, practical instruments do not all have this characteristic. For example, higher "harmonics" of piano notes are not true harmonics but are "overtones" and can be very sharp, i.e. a higher frequency than given by a pure harmonic series. This is especially true of instruments other than strings, brass, or woodwinds. Examples of these "other" instruments are xylophones, drums, bells, chimes, etc.; not all of their overtone frequencies make a simple whole number ratio with the fundamental frequency. (The fundamental frequency is the reciprocal of the longest time period of the collection of vibrations in some single periodic phenomenon.) == On stringed instruments == Harmonics may be singly produced [on stringed instruments] (1) by varying the point of contact with the bow, or (2) by slightly pressing the string at the nodes, or divisions of its aliquot parts ( 1 2 {\displaystyle {\tfrac {1}{2}}} , 1
Paperless society
A paperless society is a society in which paper communication (written documents, email, letters, etc.) is replaced by electronic communication and storage. The concept was first introduced by Frederick Wilfrid Lancaster in 1978. Furthermore, libraries would no longer be needed to handle printed documents. "Librarians will, in time, become information specialists in a deinstitutionalized setting". Lancaster also stated that both computers and libraries will not always give us the information that other people and living life will. == Literature == Brodman, E. (1979). Review of Toward Paperless Information Systems. Bulletin of the Medical Library Association, 67(4), 437–439. Buckland, M. K. (1980). Review of Toward Paperless Information Systems. Journal of Academic Librarianship, 5(6), 349. Grosch, A. (1979). Review of Toward Paperless Information Systems. College & Research Libraries, 40(1), 88–89. Kohl, D. F. (2004). From the editor . . . The paperless society . . . Not quite yet. Journal of Academic Librarianship, 30(3), 177–178. Lancaster, F. W. (1978a). Toward paperless information systems. New York: Academic Press. Lancaster, F. W. (1980b). The future of the librarian lies outside of the library. Catholic Library World, 51, 388–391. Lancaster, F. W. (1982a). Libraries and librarians in an age of electronics. Arlington, VA: Information Resources Press. Lancaster, F. W. (1982b). The evolving paperless society and its implications for libraries. International Forum on Information and Documentation, 7(4), 3–10. Lancaster, F. W. (1983). Future librarianship: Preparing for an unconventional career. Wilson Library Bulletin, 57, 747–753. Lancaster, F. W. (1985). The paperless society revisited. American Libraries, 16, 553–555. Lancaster, F. W. (1993). Libraries and the future: Essays on the library in the twenty-first century. New York: Haworth Press. Lancaster, F. W. (1999). Second thoughts on the paperless society. Library Journal, 124(15), 48– 50. Lancaster, F. W., & Smith, L. C. (1980c). On-Line systems in the communication process: Projections. Journal of the American Society for Information Science, 31(3), 193–200. Miall, D. S. (2001). The library versus the Internet: Literary studies under siege? Proceedings of the Modern Language Association, 116(5), 1405–1414. Salton, G. (1979). Review of Toward Paperless Information Systems. Journal of Documentation, 35(3), 250–252. Sellen, A. J., & Harper, R. H. R. (2003). The myth of the paperless office. Cambridge, MA: MIT Press. Stevens, N. D. (2006). The fully electronic academic library. College & Research Libraries, 67(1),5–14. Young, Arthur P. (2008).Aftermath of a Prediction: F. W. Lancaster and the Paperless Society LIBRARY TRENDS, 56(4),(“The Evaluation and Transformation of Information Systems: Essays Honoring the Legacy of F. W. Lancaster,” edited by Lorraine J. Haricombe and Keith Russell), pp. 843–858.
Color picker
A color picker (also color chooser or color tool) is a graphical user interface widget, usually found within graphics software or online, used to select colors and, in some cases, to create color schemes (the color picker might be more sophisticated than the palette included with the program). Operating systems such as Microsoft Windows or macOS have a system color picker, which can be used by third-party programs (e.g., Adobe Photoshop). == History == The concept of color pickers dates back to the early days of computer graphics and digital design. Early versions were rudimentary, often featuring basic color palettes and limited functionality. One of the first drawing programs to include a color picker was SketchPad (also referred to as LisaSketch), designed by Bill Atkinson in 1983 to showcase LisaGraf's capabilities. It used a black and white pattern system, using dithering to create the illusion of color depth. With the increased popularity of personal computers with color graphics, there soon came software similar to SketchPad that supported more than two colors, like Broderbund's Dazzle Draw for the Apple II or Electronic Arts' Deluxe Paint. However, the color pickers present in those programs relied on indexed colors. Color pickers, resembling ones used in modern software with support for direct, 24-bit color, appeared soon after the release of the Macintosh II, with the release of programs like Adobe Photoshop and Corel Painter. As the increase of color depth allowed the choice of significantly more colors, the shape and form of color pickers started to diverge. For example, Adobe Photoshop used a hue-saturation color wheel with a slider for brightness in version 0.63, later on switching to a rectangular design accompanied by a hue slider. Corel Painter pioneered the triangular saturation and brightness picker with a hue ring around it, aiming to better represent the continuity of the hue spectrum and the relationship between saturation and brightness. == Purpose == A color picker is used to select and adjust color values. In graphic design and image editing, users typically choose colors via an interface with a visual representation of a color—organized with quasi-perceptually-relevant hue, saturation and lightness dimensions (HSL) – instead of keying in alphanumeric text values. Because color appearance depends on comparison of neighboring colors (see color vision), many interfaces attempt to clarify the relationships between colors. == Interface == Color tools can vary in their interface. Some may use sliders, buttons, text boxes for color values, or direct manipulation. Often a two-dimensional square is used to create a range of color values (such as lightness and saturation) that can be clicked on or selected in some other manner. Drag and drop, color droppers, and various other forms of interfaces are commonly used as well. Usually, color values are also displayed numerically, so they can be precisely remembered and keyed-in later, such as three values of 0-255 representing red, green, and blue, respectively. === Eyedropper === The eyedropper is a tool present in most color pickers and graphics software that allows a user to read a color at a specific point in an image, or position on a display. This enables the color to be transferred to other applications particularly quickly. Modern implementations of eyedropper tools are also available as browser extensions, allowing users to pick colors directly from web pages, such as in Google Chrome and Microsoft Edge. == Working == A color picker has two main parts, first a color slider and second a color canvas. The color slider has a linear or radial gradient of the seven rainbow colors i.e. Violet, Indigo, Blue, Green, Yellow, Orange and Red. It allows one to choose any of the seven primary colors. The color value chosen from the color slider instantly reflects in the color canvas. The color canvas is a mixture of two linear color gradients. First a linear gradient of the current chosen color and second a linear gradient of the black color. This mixture of color gradients lets one choose a lighter and darker version of the current chosen color from the color slider.
Content adaptation
Content adaptation is the action of transforming content to adapt to device capabilities. Content adaptation is usually related to mobile devices, which require special handling because of their limited computational power, small screen size, and constrained keyboard functionality. Content adaptation could roughly be divided to two fields: Media content adaptation that adapts media files. Browsing content adaptation that adapts a website to mobile devices. == Browsing content adaptation == Advances in the capabilities of small, mobile devices such as mobile phones (cell phones) and Personal Digital Assistants have led to an explosion in the number of types of device that can now access the Web. Some commentators refer to the Web that can be accessed from mobile devices as the Mobile Web. The sheer number and variety of Web-enabled devices poses significant challenges for authors of websites who want to support access from mobile devices. The W3C Device Independence Working Group described many of the issues in its report Authoring Challenges for Device Independence. Content adaptation is one approach to a solution. Rather than requiring authors to create pages explicitly for each type of device that might request them, content adaptation transforms an author's materials automatically. For example, content might be converted from a device-independent markup language, such as XDIME, an implementation of the W3C's DIAL specification, into a form suitable for the device, such as XHTML Basic, C-HTML, or WML. Similarly, a suitable device-specific CSS style sheet or a set of in-line styles might be generated from abstract style definitions. Likewise, a device specific layout might be generated from abstract layout definitions. Once created, the device-specific materials form the response returned to the device from which the request was made. Another way is to use the latest trend responsive design based on CSS, covered in this article (RWD). Content adaptation requires a processor that performs the selection, modification, and generation of materials to form the device-specific result. IBM's Websphere Everyplace Mobile Portal (WEMP), BEA Systems' WebLogic Mobility Server, Morfeo's MyMobileWeb, and Apache Cocoon are examples of such processors. Wurfl and WALL are popular open source tools for content adaptation. WURFL is an XML-based Device Description Repository with APIs to access the data in Java and PHP (and other popular programming languages). WALL (Wireless Abstraction Library) lets a developer author mobile pages which look like plain HTML, but converts them to WML, C-HTML, or XHTML Mobile Profile, depending on the capabilities of the device from which the HTTP request originates. GreasySpoon lets the developer build plugins for content editing, in JavaScript, Ruby (programming language), and more, just like the Firefox application GreaseMonkey. Alembik (Media Transcoding Server) is a Java (J2EE) application providing transcoding services for variety of clients and for different media types (image, audio, video, etc.). It is fully compliant with OMA's Standard Transcoder Interface specification and is distributed under the LGPL open source license. In 2007, the first large scale carrier-grade deployments of content transformation, on existing mass-market handsets, with no software download required, were deployed by Vodafone in the UK and globally for Yahoo! oneSearch, using the Novarra Vision solution. Novarra's content adaptation solution had been used in enterprise intranet deployments as early as 2003 (at that time, the platform was named "Engines for Wireless Data"). InfoGin, the 9-year-old content-adaptation company with customers like Vodafone, Orange, Telefónica and PCCW. The patented "Web to Mobile adaptation", Mobile Matrix Transcoder, Multimedia and Documents transcoders, Video adaptation supporte. Launched in 2007, Bytemobile's Web Fidelity Service was another carrier-grade, commercial infrastructure solution, which provided wireless content adaptation to mobile subscribers on their existing mass-market handsets, with no client download required.